Proper Injection procedures

cboozer

Member
u need trial and error and see what works best for you i perfer 23 g 1 1/2 no matter where i pin but thats me
 

Anothergymrat

New member
Quads

What does it mean when you're pinning the outer quad, aspirate and everything looks good, but it's hard as hell to push the plunger in and your leg is sore the next day?
 

Eleven11

Biker/Bowhunter Moderator
Staff member
What does it mean when you're pinning the outer quad, aspirate and everything looks good, but it's hard as hell to push the plunger in and your leg is sore the next day?

You may have gotten more into a tendon or if you've been using for quite some time scar tissue.
On quads I like to go in at an angle from the outside in toward the middle. If you hit something like tjat either pull out and re-insert or just back out a little then re-aspirate and inject...............11
 

rtmjr

New member
can I fill a cycle worth of syringes in advance and store them in a secure, clean place?

Edit: nevermind. I just read all about how EO degrades the plunger.
 
Last edited:

Eleven11

Biker/Bowhunter Moderator
Staff member
can I fill a cycle worth of syringes in advance and store them in a secure, clean place?

Edit: nevermind. I just read all about how EO degrades the plunger.

lol I was going to say as long as it doesn't have EO your OK. :cool: .......................11
 

bri69

New member
Question about needle size?

I'm not a newbie, been using AAS at least 6-8 years but anyway, I am on TRT as well but I do huge Cycles every 4-6 weeks for an amount of time appropriate for the drug I'm using like I just finished a 10 week cycle of
300mg/EOD of Andromix / 100mg Test Prop E3D / 250MG Test Cyp Every Week / 75mg of Proviron ED and I just finished up my Andomix a few days ago and I'm still doing my Test. Cyp since I never come off, and I'm still doing my Proviron which I LOVE (Never did any until this cycle) but anyway, I bought some 5/8" 25g Needles to inject my shoulders. I just want to know if this is OK? I am very tight and in shape. I can always loose a bit around the waist but as far as Shoulders, Chest, Lats, ect.... I have no fat in those areas. So my thought was to cut back on the deep injections in the shoulder area since it's all muscle anyway. I have done a few shots this way and It seem to be working but truly I couldn't tell yet anyway. I use a 1" 25g in my Outer and center Quads, and a 1 1/2" 25g in my Glute area, but I am running out of space especially after doing EOD injections for 10 weeks plus I've been doing 1-2 shots per week for the last 4 or 5 years so I am starting to build up a lot of scar tissue in my Quads which used to be my ONLY injection areas. But I just need to know if the 5/8" is getting deep enough or should I just go back to the 1"? I have a low range of motion due to muscle size and It's hard for me to properly hold the needle to inject when I go deep, and I have lots more PIP with the 1". Anyone chime in I would highly appreciate it.

1 more question, I am having a hard time Finishing up with sex and it has gotten really bad. I have sex 1-2 x's weekly and been married 20 years so it could be that. But I think it was probably the Tren. so that's why I started running the Proviron and it's helping a little, I added in L-Arginine 3000mg daily 2 days ago and I read it helps as well, which I did blow a good one today, but that was the first in a while. I mean I have to really slam my wife for at least 30 minute to get off and she finishes 2x's by then and is ready to quit. Sounds sad but like I said, been married 20 years and we do have fun in bed but I am wearing myself out to get off. I ordered some HCG to go along with the Prov. and the L-Arginine so I will start that as soon as I get it, probably 2 weeks. Anyway, I do hope the HCG helps, it's been at least a year since I ran it, and I never had this problem but it started to be a problem about 6 months ago then got really bad through this last Cycle of Andomix which I know Tren. is famous for this. Any suggestions there will help as well. Like I said, I am going to continue the Proviron for at last 2 more months probably. Oh, I also started Clen. 2 weeks ago and that was when I couldn't blow one at all. I plan on taking 2 weeks off so I guess I'll see. Please help me if you can on both subjects!
Bri
 
Last edited:

Eleven11

Biker/Bowhunter Moderator
Staff member
I'm not a newbie, been using AAS at least 6-8 years but anyway, I am on TRT as well but I do huge Cycles every 4-6 weeks for an amount of time appropriate for the drug I'm using like I just finished a 10 week cycle of
300mg/EOD of Andromix / 100mg Test Prop E3D / 250MG Test Cyp Every Week / 75mg of Proviron ED and I just finished up my Andomix a few days ago and I'm still doing my Test. Cyp since I never come off, and I'm still doing my Proviron which I LOVE (Never did any until this cycle) but anyway, I bought some 5/8" 25g Needles to inject my shoulders. I just want to know if this is OK? I am very tight and in shape. I can always loose a bit around the waist but as far as Shoulders, Chest, Lats, ect.... I have no fat in those areas. So my thought was to cut back on the deep injections in the shoulder area since it's all muscle anyway. I have done a few shots this way and It seem to be working but truly I couldn't tell yet anyway. I use a 1" 25g in my Outer and center Quads, and a 1 1/2" 25g in my Glute area, but I am running out of space especially after doing EOD injections for 10 weeks plus I've been doing 1-2 shots per week for the last 4 or 5 years so I am starting to build up a lot of scar tissue in my Quads which used to be my ONLY injection areas. But I just need to know if the 5/8" is getting deep enough or should I just go back to the 1"? I have a low range of motion due to muscle size and It's hard for me to properly hold the needle to inject when I go deep, and I have lots more PIP with the 1". Anyone chime in I would highly appreciate it.

1 more question, I am having a hard time Finishing up with sex and it has gotten really bad. I have sex 1-2 x's weekly and been married 20 years so it could be that. But I think it was probably the Tren. so that's why I started running the Proviron and it's helping a little, I added in L-Arginine 3000mg daily 2 days ago and I read it helps as well, which I did blow a good one today, but that was the first in a while. I mean I have to really slam my wife for at least 30 minute to get off and she finishes 2x's by then and is ready to quit. Sounds sad but like I said, been married 20 years and we do have fun in bed but I am wearing myself out to get off. I ordered some HCG to go along with the Prov. and the L-Arginine so I will start that as soon as I get it, probably 2 weeks. Anyway, I do hope the HCG helps, it's been at least a year since I ran it, and I never had this problem but it started to be a problem about 6 months ago then got really bad through this last Cycle of Andomix which I know Tren. is famous for this. Any suggestions there will help as well. Like I said, I am going to continue the Proviron for at last 2 more months probably. Oh, I also started Clen. 2 weeks ago and that was when I couldn't blow one at all. I plan on taking 2 weeks off so I guess I'll see. Please help me if you can on both subjects!
Bri


5/8 should be ok but inject very slow. Oil needs to be deep as possible and personally I wouldn't use 5/8 unless I had to on occasion.
I use 1.5" on everything now and depending on the muscle my not go as deep.
Other deal is the tren, sorry but just comes with using it . HCG, Proviron helps but sometimes it's just not going to happen. Maybe Viagra on occasion to help with sensitivity but that's about it.................11
 

bri69

New member
Thanks 11, I have some HCG on the way and more Proviron and I already have some Viagra just for special occasions. I finished up the Tren last week so hoping to get back to having a good orgasm. I already had a little better time last night so hopefully in a week or 2, I'll be back to normal. My poor wife thinks Im loosing my attraction for her and little does she know I could "F" her EVERY night of the week if she would! Thanks again for the response 11.

Bri
 

collabera

New member
1) Can I use the same needle to draw with everytime I draw? Seems like itd be ok as long as im not sticking myself with it right? I draw with 18g and inject with 25g. Only had one pin so far so wondering if i can use the same 18 again.
2) Can I use the same syringe as long as Im using a new 25g needle everytime? seems like you should be able to unless you aspirate and get blood in it. Why else would they sell boxes full of 100 needles if you werent going to use the same syringe. Where I live it took forever to find a pharmacy that would sell syringes and needles seperate and had the sizes I needed.
3) can someone explain how to heat Test E? I dont really understand how its done.
4)is there anything leftover in the needle itself after pushing the plunger all the way? If so, should i pull a little bit over the 1ml I usually inject to get the correct dose?
 

mhmurray

Active member
1) Can I use the same needle to draw with everytime I draw? Seems like itd be ok as long as im not sticking myself with it right? I draw with 18g and inject with 25g. Only had one pin so far so wondering if i can use the same 18 again.
2) Can I use the same syringe as long as Im using a new 25g needle everytime? seems like you should be able to unless you aspirate and get blood in it. Why else would they sell boxes full of 100 needles if you werent going to use the same syringe. Where I live it took forever to find a pharmacy that would sell syringes and needles seperate and had the sizes I needed.
3) can someone explain how to heat Test E? I dont really understand how its done.
4)is there anything leftover in the needle itself after pushing the plunger all the way? If so, should i pull a little bit over the 1ml I usually inject to get the correct dose?

The safest thing is to use new pins snd plungers eavh time. You don't want an infection. I've found that while pulling it out with a large ga pin works well, yoi tend to get a lot of product lefy in the pin, which if your swappping for a smaller ga, the product is lost.

A good way to heat test is to put the vial in hot water prior to injecting
 

collabera

New member
The safest thing is to use new pins snd plungers eavh time. You don't want an infection. I've found that while pulling it out with a large ga pin works well, yoi tend to get a lot of product lefy in the pin, which if your swappping for a smaller ga, the product is lost.

A good way to heat test is to put the vial in hot water prior to injecting

Are there ways to prevent the loss of product? Seams like if Im trying to get all 10 doses of 250mg of test e out of a 10ml vial then id be short by the time i got to the last drops of the vial.

And heating will help reduce pain huh? Did my first injection yesterday and was shaking like crazy. Hate needles lol Ill get used to it. Pain really hit me in the middle of the night when I moved my leg and today its been sore. No swelling or anything though. Injection site looks normal.

Also what would be some signs of infection if one were to get one? or is there a post someone can refer me to on that? trying to learn all I can hear to be as safe as possible.
 

Eleven11

Biker/Bowhunter Moderator
Staff member
Are there ways to prevent the loss of product? Seams like if Im trying to get all 10 doses of 250mg of test e out of a 10ml vial then id be short by the time i got to the last drops of the vial.

And heating will help reduce pain huh? Did my first injection yesterday and was shaking like crazy. Hate needles lol Ill get used to it. Pain really hit me in the middle of the night when I moved my leg and today its been sore. No swelling or anything though. Injection site looks normal.

Also what would be some signs of infection if one were to get one? or is there a post someone can refer me to on that? trying to learn all I can hear to be as safe as possible.

Minimal oil is in the needle, but just simply draw the plunger down before changing to a smaller needle. Let a few drops slide down the needle to lubricate it before injecting. Don't sweat a little waste you cant get every drop out of every bottle.
You can heat if you want but I never bothered, most are pain free or mixing with other AAS like deca, eq etc will lessen pain from most test..............11
 

collabera

New member
Minimal oil is in the needle, but just simply draw the plunger down before changing to a smaller needle. Let a few drops slide down the needle to lubricate it before injecting. Don't sweat a little waste you cant get every drop out of every bottle.
You can heat if you want but I never bothered, most are pain free or mixing with other AAS like deca, eq etc will lessen pain from most test..............11

Noted. Thank you
 

christoph83

New member
the only thing i disagree with is pushing the needle all the way in if self injecting. If something happens causing you to break off a needle good luck getting that bitch out i usually leave about a quarter of an inch out. My boy did this the only thing we could do was take him to the hospital. we tried to get it our and it wasnt pretty. but to each his own
 

Eleven11

Biker/Bowhunter Moderator
Staff member
the only thing i disagree with is pushing the needle all the way in if self injecting. If something happens causing you to break off a needle good luck getting that bitch out i usually leave about a quarter of an inch out. My boy did this the only thing we could do was take him to the hospital. we tried to get it our and it wasnt pretty. but to each his own

In over 20 years I've never broke a needle, I don't bury the needle all the way myself and now days I only by 1.5 needles and push in as far as needed depending on the muscle. BUT braking a needle would be a major problem..............11
 

christoph83

New member
In over 20 years I've never broke a needle, I don't bury the needle all the way myself and now days I only by 1.5 needles and push in as far as needed depending on the muscle. BUT braking a needle would be a major problem..............11

I've never done it yet either. Better safe then sorry
 
The method you guys promote in the top two articles is by far the most used by nurses also. Growing up asthmatic I got two shot every week till I was 18, and in just one visit to the hospital for an attack they hit my thighs/upper legs with 23 shots in 48 hours to get me back in shape. I have had literally thousands of shots, never had any infections and only reaction to the substance occasionally of course being asthmatic. Obviously needle don't intimidate me in the least. With all that said, good luck getting blood gases out of me though, they take that with a 1" or so needle out of your wrist, trying to hit your arteries. Last time it took 2 docs and three nurses and a papoose board cause the intern couldn't hit the mark, lol Even at 8 I put up a helluva fight.
 

pins

Well-known member
I've been injecting myself for 30 years and I've NEVER broke a needle in me.Ive had a muscle spasm and bend a needle but never broken one....
 
Top